Troubleshooting Your Air Conditioning System

When it’s hot enough to fry eggs on the sidewalk the last thing you need is an air conditioner on the blink. It can happen, though, because the hottest weather is when power systems are stressed and can easily be overloaded. What to do if your AC suddenly stops working? Well, before you call the HVAC service  hot-line there are some steps you can take yourself. 

The following list includes some of the most common air conditioning repair problems you are likely to face, as well as some advice on when to call in the HVAC repair experts. 

  • Air conditioner stops, won’t turn back on – First, check that the thermostat is set to cool and that the power switches are turned on. At this point you should also check all fuses and circuit breakers to make sure the home electrical system is working.
  • “Funny” noises coming from AC unit – Turn unit off, then go outside to see if fan blades are dirty.
  • Unit leaking refrigerant – When the unit is leaking or is low on refrigerant, don’t simply add more refrigerant. This is “call the repairman” time. Your HVAC tech will come out to address the issue, test your unit and make sure it is properly charged with refrigerant.
  • Unit is leaking water – It’s likely that the unit isn’t cooling properly and that cooling coil may be freezing over. The problem could be an inadequate air supply or low refrigerant. This will require a tech to diagnose and fix.
  • Thermostat disagrees with thermometer – This might be a simple DIY fix; recalibrate and reposition thermostat  so that it accurately senses room temperature. 

If you are at all uncomfortable performing any of these steps don’t hesitate to call yoru residential HVAC contractor.

Why Can’t My Air Conditioner Keep Up?

If you turn on the air conditioning system this year and discover that it is running more than it used to or runs constantly and still can’t keep your home cool, it may be time for a new HVAC system or at a minimum, to schedule an appointment for HVAC system maintenance.  However, before you spend the money on a new system, have your current system checked out by an experienced HVAC contractor.  You may be able to increase the operating efficiency of your existing system and avoid the cost of a new system.

The first thing to do is to check your air filter and clean or replace it if needed.  A dirty air filter can not only reduce your cooling system’s efficiency, but it can cause the system to work harder and wear out sooner.  Cleaning or changing your air filter regularly will help keep your system in top operating condition.

Next, have your duct system inspected and sealed if necessary by a professional heating and cooling equipment contractor.  Leaky, inefficient duct systems are very common and according to EPA estimates, they account for a reduction in system efficiency by as much as 20 percent.  Sealing your ducts will not only increase the efficiency of your cooling system and make your home more comfortable, it will also reduce energy consumption and help protect the environment.

Finally, have your system serviced by an experienced HVAC technician.  Your system could have low refrigerant levels, malfunctioning expansion valve, or some other problem that is causing the system to work poorly.  You HVAC technician has the training and skill to identify and correct the problem and keep your system in top operating condition.